CZ Series SSR Controls

CZ Series SSR Controls

FEATURES

Low cost SSR Zero Voltage switched
power controllers

The Avatar C1Z Series units are Zero Voltage switched, single or three phase fused power controls used to replace mercury or mechanical
relays. there are no parts to mechanically wear out: Millions of operations can occur without failure. High/fast duty cycle will not damage the C1Z series controllers. No arcing problems like with mechanical relays. Dust and Dirt will not cause long term reliability issues.

• Full rated output at 50 degrees C ambient temperatures
• Economical Zero Voltage
  switching SSR's
• 15 and 25 Amp packages
• I2T Fuses mounted on heatsink
• MOV protection & lugs standard
• No transformers to wire up
• Standard Control Signal 4-20 mA compliance voltage 6 VDC Input & Voltage Limit Adjustment
• 3-32 VDC and 120V input signal available
• Standard single and three phase, 1, 2 & 3 leg packages

ORDERING CODES
_{_______-_______-________-_______-_______
Model Voltage Amperes Options Options}

MODEL CONFIGURATION

C1Z Single Phase
C2Z Three phase 2-Leg
C3Z Three phase 3-Leg

VOLTAGE DESIGNATIONS

120 VAC 50-60Hz (12)
208-240 VAC 50-60Hz (24)
277 VAC 50-60Hz (27)
380 VAC 50-60Hz (38)
480 VAC 50-60Hz (48)
575 VAC 50-60Hz (57)
600 VAC 50-60Hz (60)

LOAD IN AMPS

15, 25, 40

OPTIONS R Option 5-32 VDC on-off command signal (-R32) 120 VAC on-off command signal (-R120) Delete Fusing (-NF) Example: C2Z-48-25 is a zero voltage switched, two-leg, three phase , 120-480VAC, 25 Ampere SSR with a third leg fuse option.

DIMENSIONS
Figures in inches.

Amp Rating	H x W x D	Mounting Dimensions
Per Controlled Leg	5.5 x 4.8 x 3.6	5 x 4.5